Subscribe to Our Youtube Channel
Related Manuals for Epson TM-T82XM
Summary of Contents for Epson TM-T82XM
- Page 1 EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM -T83IIIM) Version 3.00 Apr. 2021...
- Page 2 (3) Comments and notification of any mistakes in this documentation are gratefully accepted. (4) This software cannot be used with other equipment that the specified. (5) EPSON will not be responsible for any consequences resulting from the use of any information in this documentation. Trademarks Microsoft®, Windows®, Windows Server®, Visual Basic®...
-
Page 3: Table Of Contents
3.6.3 Error Correction Level ..................16 3.6.4 Printing Position ....................16 3.7 GS1 Printing (two dimension) .................. 17 3.7.1 Symbology Parameter ..................17 3.7.2 Printing Size ....................... 17 3.7.3 Printing Position ....................17 3.7.4 Data Format ......................17 APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM) - Page 4 3.13 Printable bitmap types and sizes ................21 3.14 Maintenance Counter ..................... 22 3.15 Automatic Recovery Function ................22 3.16 Output without Flow Control on the USB/Ethernet Interfaces ......22 SECTION 4. WARNINGS ....................23 APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM)
-
Page 5: Section 1. Introduction
Station: Receipt (Line Thermal 203 dpi X 203 dpi) Compatibility mode The compatibility mode for upward compatibility was added in OPOS Ver2.60. For the details of the compatibility mode, please refer to “EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE Compatibility Mode”. APPLICATION DEVELOPMENT GUIDE... -
Page 6: Section 2. Details On Settings
Version 3.00 Apr. 2021 Section 2. Details on Settings This section describes connection configurations and how to make the settings for the TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83III Series printers. 2.1 References of Firmware Versions Refer to the release notes (Relnote.txt/SupportedDevicesList.txt). 2.2 Settings of Memory Switches Please check device specification sheet. -
Page 7: Device Settings
For the TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM models, the following device specific settings are settable by the SetupPOS utility. For the detail, please refer to the corresponding part of the Section 2 of “EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)” Settings... -
Page 8: Section 3. Function Details
Version 3.00 Apr. 2021 Section 3. Function Details This section describes the functions of the TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM models in details. Supplementary explanation of the parts not described in detail in the "UPOS" is also given here. 3.1 Property Set Values and Default Values The following explanation is about the property set values and the default values. - Page 9 FALSE CapSlpFullslip FALSE CapSlpPresent FALSE CapSlpPageMode FALSE CapSlpRuledLine FALSE If Thai 3 Pass character model or VIETNAMESE character model, “PTR_CCS_UNICODE” is set. If Thai 3 Pass character model or VIETNAMESE character model, “TRUE” is set. APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM)
-
Page 10: List Properties
”0, R90, L90, 180” SlpBarCodeRotationList “” SlpBitmapRotationList “” FontTypefaceList “” All characters loaded in the device are allocated to Unicode for printing. However, the BinaryConversion property should be set to "OPOS_BC_NONE" when printing with Unicode. APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM) - Page 11 ”0, R90, L90, 180” SlpBarCodeRotationList “” SlpBitmapRotationList “” FontTypefaceList “” All characters loaded in the device are allocated to Unicode for printing. However, the BinaryConversion property should be set to "OPOS_BC_NONE" when printing with Unicode. APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM)
- Page 12 ”0, R90, L90, 180” SlpBarCodeRotationList “” SlpBitmapRotationList “” FontTypefaceList “” All characters loaded in the device are allocated to Unicode for printing. However, the BinaryConversion property should be set to "OPOS_BC_NONE" when printing with Unicode. APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM)
-
Page 13: Width And Height Properties
Font B is selected. It can be changed by the settings of the RecLineSpacing or the RecLineHeight. Only TM-T81IIIM/ TM-T82XM are supported. It can be changed by the settings of the RecLineSpacing or the character height. APPLICATION DEVELOPMENT GUIDE... -
Page 14: Common Property Strings
BCR: Rotated printing of barcode is available. If the Station’s CapRecPageMode property value is FALSE, the PageModeArea property shall have” ” and the PageModeDescriptor property shall have ”0” respectively as a setting value. Only TM-T81IIIM/ TM-T82XM are supported. APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM) -
Page 15: Methods
PageModePrintArea property setting in the horizontal direction. If other than “LEFT” is specified for the printing position of bitmap, the printing shall be done, regardless of the PageModeHorizontalPosition property setting, based on the PageModePrintArea property setting in the horizontal direction. APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM) -
Page 16: Escape Sequences
*#dL O : Supported X : Unsupported Numbers: Settable range Regardless of the PageModeHorizontalPosition property setting, center or right adjust what is to be printed based on the PageModePrintArea property setting in the horizontal direction. APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM) -
Page 17: Printable Barcode Type
Version 3.00 Apr. 2021 3.4 Printable Barcode Type The TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM printers allow the following barcode types. • Code 128 • Code 128 Parsed • Code 93 • Codabar • • Code 39 • JAN 13 (EAN 13) • JAN 8 (EAN 8) •... -
Page 18: Maxi Code Printing
(For the secondary message, an error occurs if the data length is more than 70 bytes.) APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM) - Page 19 (An error occurs if Data is zero byte or more than 80 bytes.) APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM)
-
Page 20: Qr Code Printing
Because of this reason, data amount can be correctly verified. 3.6.3 Error Correction Level Error correction level is fixed at 7%. 3.6.4 Printing Position Like the one-dimensional barcode, the print position of the two dimensional barcode is the specified position. APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM) -
Page 21: Gs1 Printing (Two Dimension)
0x30-0x39. Or if the first character is 0x28, the second and the third characters are limited to 0x30-0x39.) [Special characters of GS1 DataBar 128] Special characters ASCII FNC1 ‘(’ ‘)’ APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM) -
Page 22: Composite Printing
If the two-dimensional barcode cannot fit into the print area (depending on the paper width, layout settings, etc.) then OPOS_E_ILLEGAL is returned and at this moment ResultCodeExtended becomes 0. 3.8.3 Printing Position Like the one-dimensional barcode, the print position of the two-dimensional barcode is the specified position. APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM) -
Page 23: Data Format
0x30-0x39.) GS1 DataBar 128 3 to 255 0x00-0x7f [Special characters of Barcodes (GS1 DataBar 128, GS1 DataBar Expanded and GS1 DataBar Expanded Stacked)] Special characters ASCII FNC1 FNC3 ‘{’ ‘(’ ‘)’ ‘*’ APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM) -
Page 24: Power Condition Reports
Powered on reporting: Supported Powered off reporting: Unsupported 3.10 Synchronous Processing The TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM printers use Process ID to determine output completion. Use of the Process ID allows multiple print commands to be queued to the printer simultaneously. For this reason, Asynchronous output (AsyncMode = TRUE) gives a performance improvement. -
Page 25: Electronic Logo Function (Nvram)
To print image files registered with NVRAM, please use the either of the following DirectIO: PTR_DI_FLASH_BITMAP PTR_DI_FLASH_BITMAP2. Please refer to the corresponding part of the Section 4 of “EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)” for detail. 3.13 Printable bitmap types and sizes The TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM support the following bitmap commands. -
Page 26: Maintenance Counter
71,582,788 Cumulative 3.15 Automatic Recovery Function The TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM feature a function for automatic recovery when the power is turned on again after an interruption of power. Recovery processing is performed automatically when the printer’s power is turned on again after an interruption. The recovery processing restores the printer to the condition it was in before the power was turned off. -
Page 27: Section 4. Warnings
Version 3.00 Apr. 2021 Section 4. Warnings Not applicable APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM)
Need help?
Do you have a question about the TM-T82XM and is the answer not in the manual?
Questions and answers