Table of Contents
Advertisement
Recoverable Errors
The printer cannot print when a recoverable error occurs. It can be recovered easily by turning the power on
again or sending an error recovery command from the driver after eliminating the cause of the error.
Error
Autocutter
Autocutter does not work
error
correctly
The error recovery command is valid only if a recoverable error (excluding automatically
recoverable errors) occurs.
Use the TM-T82X Utility to change the condition for recovery. For details, see the TM-T82X Utility
User's Manual.
Unrecoverable Errors
The printer cannot print when an unrecoverable error occurs. If the error persists after turning the printer off
and then on again, the printer may be defective. Contact qualified service personnel.
Turn off the power immediately when an unrecoverable error occurs.
CAUTION
Error
R/W error in memory
After R/W checking, the printer does not work
correctly.
High voltage error
The power supply voltage is extremely high.
Low voltage error
The power supply voltage is extremely low.
CPU execution error
The CPU is executing an incorrect address.
Internal circuit
Internal circuits are not connected correctly.
connection error
Error description
Error description
Chapter 1 Product Overview
Error LED status
Condition for Recovery
ON
Recovers from the error when
the jammed paper or foreign
matter is removed, and the roll
paper cover is closed.
Error LED flash code
LED ON
LED OFF
Approx. 320 ms
15
Advertisement
Table of Contents
