OSEE Lilmon 5 User Manual page 61

MySets and Tools
Spectrum, as shown in Figure 6.1-7:
Figure 6.1-7 Comparison Mode-Original Image and Normal Mode
Image

The Zebra tool is incompatible with the False Color tool. That is,
enable the Zebra tool, the False Color tool will be disabled
automatically, and enable the False Color tool, the Zebra tool will be
disabled automatically.
2.
Zebra
The Zebra function is used to display image on the screen with a
zebra pattern to adjust the camera exposure parameter. It will
compare the signal luminance with the zebra parameters. You can
set two limitations as Tone 1 and Tone 2. Tone 1 is limited between
Tone 1 MIN and Tone 1 MAX, Tone 2 is limited between Tone 2 MIN
and Tone 2 MAX. The relevant image area will be filled with a white
and black stripe zebra pattern if the luminance is in the range of Tone
1. Besides, it will be filled with a white and blue stripe zebra pattern if
the luminance is in the range of Tone2.
For example, set Tone 1 MIN as 0% and Tone 1 MAX as 4%, Tone
2 MIN as 97% and Tone 2 MAX as 100%, the compared results are
as shown in Figure 6.1-8, the specific area is filled with a zebra
pattern.
53