JETWAY 630BF User Manual page 22

11. Front Panel connector: This 16-pin connector to connect to case front panel
switch.
A. Turbo LED switch: TBLED
The motherboard's turbo function is always on. The turbo LED will remain
constantly lit while the system power is on. You may also to connect the
Power LED from the system case to this lead. See the figure below.
B. Reset switch lead: RESET
This 2-pin connector connects to the case-mounted reset switch for rebooting
your computer without having to turn off your power switch. This is a preferred
method of rebooting in order to prolong the life of the system's power supply.
See the figure below.
C. Keyboard lock switch lead & Power LED: KEYLOCK & POWER LED
This 5-pin connector connects to the case-mounted key switch for locking the
keyboard for security purposes and Power LED together.
D. Speaker connector: SPKR
This 4-pin connector connects to the case-mounted speaker. See the figure below.
12. IR infrared module connector: IR
This connector supports the optional wireless transmitting and receiving infrared
module. This module mounts to small opening on system cases that support this
feature you must also configure the setting through BIOS setup. Use the five pins
as shown on the Back View and connect a ribbon cable from the module to the
motherboard according to the pin definitions.
19