Table of Contents
Advertisement
Storing Header Information for a Dual ARB Player Waveform Sequence
When you create a waveform sequence (described on
which takes priority over the headers for the waveform segments that compose the waveform sequence. During a
waveform sequence playback, the waveform segment headers are ignored (except to verify that all required options are
installed). When you store the waveform sequence, its file header is stored with it.
Modifying and Viewing Header Information in the Dual ARB Player
Once a modulation format is turned off, the waveform file is available only to the dual ARB player. This is also true for
downloaded waveform files. Because of this, future edits to a waveform's header information must be performed using
the dual ARB player.
To modify header information in the dual ARB player, the waveform file must be playing in the dual ARB player
(although you can view the header information in the dual ARB player without playing the file)
You can reapply saved header settings by reselecting the waveform file for playback. When you do this, the values from
the Saved Header Settings column are applied to the PSG.
Modifying Header Information
All of the same header characteristics shown in
the dual ARB player. This task guides you through selecting a waveform file and accessing the header for the selected
file, then refers you back to the aforementioned procedure to perform the modifications.
1. Select a waveform:
a. Press Mode > Dual ARB > Select Waveform.
b. Using the arrow keys, highlight the desired waveform file.
c. Press the Select Waveform softkey.
2. Play the waveform: Press ARB Off On to On.
3. Access the header: Press ARB Setup > Header Utilities.
"Modifying Header Information in a Modulation Format"
4. Refer to
•
For a default header, read the information in step one on
procedure.
•
To modify an existing file header, start with step three on
The rest of this section focuses on the additional file header operations found in the dual ARB player.
Keysight PSG Signal Generators User's Guide
page
91), the PSG automatically creates a default file header,
Modifying Header Information in a Modulation Format
page
80, then perform the remaining steps in the
page
82.
Arbitrary (ARB) Waveform File Headers
to edit the header information:
Basic Digital Operation
are valid in
85
Advertisement
Table of Contents
