Detection Distance - ABB Adam DYN-Info M12-5 Product Manual

Coded non-contact safety sensor
Hide thumbs Also See for Adam DYN-Info M12-5:
Table of Contents

Advertisement

Detection distance

Eva can be turned in several different ways relative to Adam, see details in the figure below. The
green fields in the picture show the detection range of Adam relative to Eva. The Eva is detected
when the two coils (see red-marked areas, image below) in Eva are in contact with the green field.
The figures above shows maximum detection distances.
Detection distance between Adam and Eva:
Recommended distance between Adam and Eva:
Minimum distance between two Eden pairs:
Caution!
The detection distance can be affected if Eden is mounted close to metal.
Distance plate DA 1B must be used to prevent this.
Distance plate (DA 1B)
2TLC172271M0201
Rev.H
0-15 mm +/- 2 mm
7 mm
100 mm
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eden dynAdam c dyn-info m12-5Adam dyn-reset m12-5Adam dyn-status m12-5Eva general codeEva c general code ... Show all

Table of Contents