English - Philips HR2028 Manual

EnglisH

6
introduction
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that
Philips offers, register your product at www.philips.com/welcome.
general description (Fig. 1)
a Measuring cup
B Lid of blender jar
C Blender jar
d Level indication
E Sealing ring
F Blade unit
g Motor unit
H Control panel
- Speed buttons (1 and 2)
- Pulse/off button
i Filter
J
Dry mill beaker
K Wet mill beaker
l Mill sealing ring
M Mill blade unit
important
Read this user manual carefully before you use the appliance and save it for future reference.
general
danger
- Never immerse the motor unit in water or any other liquid, nor rinse it under the tap. Use only
a moist cloth to clean the motor unit.
Warning
- Check if the voltage indicated on the appliance corresponds to the local mains voltage before
you connect the appliance.
- If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised
by Philips or similarly qualified persons in order to avoid a hazard.
- Do not use the appliance if the plug, the mains cord or other parts are damaged.
- Never use the blender jar, the dry mill beaker or the wet mill beaker to switch the appliance
on and off.
- Never let the appliance run unattended.
- This appliance is not intended for use by persons (including children) with reduced physical,
sensory or metal capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not touch the blades, especially when the appliance is plugged in. The blades are very sharp.
- If the blades get stuck, unplug the appliance before you remove the ingredients that block the blades.
- Make sure the blade unit is securely fastened to the blender jar or mill beaker before you
assemble the blender jar or mill beaker onto the motor unit.