Philips HR2028 Manual page 10

EnglisH
10
7 Pour out the drink through the pouring lip of the blender jar. (Fig. 8)
Tip: For optimal results, put the jar with the remaining ingredients back onto the appliance and let it run
for a few more seconds.
Note: When you process a large quantity, we advise you not to put all the ingredients in the filter at the
same time. Start to process a small quantity and let the appliance run for a few seconds. Then switch off
the appliance and add another small quantity. Repeat this procedure until you have processed all the
ingredients. Always keep the lid on the blender jar during processing.
8 Clean all removable parts immediately after use (see chapter 'Cleaning').
Mill
This blender is supplied with two mills:
- The dry mill (the smaller one) is intended for grinding dry ingredients, such as dried beans, dried
rice, dried shrimps or dry tea leaves.
- The wet mill (the larger one) is intended for chopping moist ingredients, such as chili paste and
soaked rice.
using the mill
1 Put the ingredients in the mill beaker (Fig. 9).
You can process wet and dry ingredients.
Do not fill the mill beaker beyond the MAX indication.
2 Assemble the sealing ring on the blender blade unit (dry mill) or assemble the sealing ring on
the wet mill blade unit (wet mill) (Fig. 10).
3 Put the dry mill blade unit on the dry mill beaker (1) or put the wet mill blade unit on the
wet mill beaker (1) and screw the blade unit anticlockwise (2) until it is fixed
properly (Fig. 11).
4 Turn the assembled mill upside down and screw it clockwise onto the motor unit
('click') (Fig. 12).
5 Put the mains plug in the wall socket.
6 Press and hold the PULSE button and let the appliance run until the ingredients are fine enough
This takes approx. 10-30 seconds.
disassembling the mill
1 Unplug the appliance.
2 Screw the mill anticlockwise off the motor unit.
3 Turn the mill upside down and screw the blade unit clockwise off the mill beaker.
4 Clean all removable parts immediately after use (see chapter 'Cleaning').