Professional Tuning Software Protuner; Introduction; Software Installation - Leadshine Technology DM422 User Manual

13. Professional Tuning Software ProTuner

Introduction

This section will provide an overview of connection and basic setup instructions for Leadshine's
digital stepping driver DM422 using the ProTuner software. These instructions will walk you through
the following steps necessary to start up your driver and motor. This section is intended for setting up
the driver with the ProTuner.

Software Installation

The ProTuner is windows based setup software for tuning Leadshine's digital stepper driver DM422.
It can run in windows systems, including Win95/Win98/WindowsNT/ Windows 2000/Windows XP.
And the selected PC should have 1 serial port at least for communicating with the driver.
Double click "ProTuner_DM422.exe" to begin installing the ProTuner. See Figure 11. Click Next to
enter the "License Agreement" window. See Figure 12.
Figure 11: Begin to install the ProTuner
Tel: +086 0755-26434369
DM422 Digital Stepping Driver Manual V1.0
15 Web Site: www.leadshine.com
Figure 12: License agreement
Choose "I agree to the terms of this license agreement" and click Next to continue installation. The
user can enter user's information in the following window. See Figure 13. After entering the user's
information, click Next to select installation folder, where you would like to install the ProTuner. See
Figure 14.
Figure 13: User's information settings
Tel: +086 0755-26434369
DM422 Digital Stepping Driver Manual V1.0
16 Web Site: www.leadshine.com