Remote Control Connection Socket, 19-Pole; Rint X12 Robot Interface; Busint X11 Industrial Bus Interface - EWM Tetrix 451 AC/DC Smart 2.0 FW Operating Instructions Manual

5.5.2

Remote control connection socket, 19-pole

Pos. Pin
1 A
2 B/L
3 F
4 C
5 D
6 J/U
7 K
8 V
9 R
10 H
11 M/N/P
12 G
5.5.3

RINT X12 robot interface

The standard digital interface for mechanised applications
(optional, retrofitting on the machine or external fitting by the customer)
Functions and signals:
•
Digital inputs: start/stop, operating modes, JOB and program selection, inching, gas test
•
Analogue inputs: control voltages, e.g. for welding performance, welding current, etc.
•
Relay outputs: process signal, ready for welding, system composite fault, etc.
5.5.4

BUSINT X11 Industrial bus interface

The solution for easy integration with automated production with e.g.
•
Profinet/Profibus
•
EnthernetIP/DeviceNet
•
EtherCAT
etc.
099-000251-EW501
27.10.2017
Signal shape Designation
Output Connection for cable screen (PE)
Output Current flows signal I>0, galvanically isolated (max. +- 15V/100mA)
Output Reference voltage for potentiometer 10V (max. 10mA)
Input Control value specification for main current, 0-10V (0V = I
I )
max
Input Control value specification for secondary current, 0-10V (0V = I
= I )
max
Output Reference 0V
Output Power supply +15V, max. 75mA
Output Power supply -15V, max. 25mA
Input Start/Stop welding current
Input Switching between main and secondary welding currents (pulses)
Input Activation of control voltage specification
Set all 3 signals to reference potential 0V to activate external control
voltage specification for main and secondary currents
Output Measured value I
Design and function
Figure 5-12
(1V = 100A)
SETPOINT
Interfaces for automation
, 10V =
min
, 10V
min
33