Table of Contents
Advertisement
Setting the Video Signal (VIDEO menu only)
5
On-screen Display
Selecting a Background Image
On-screen Display
E-37
DT-200(E)#p36_40.p65
2,3,4
1, 6
2,3,4
1, 5
37
The video input system mode is preset to "Auto";
however, it can be changed to a specific system mode
if the selected system mode is not compatible with the
connected audiovisual equipment.
1 Press MENU. The "Picture" menu screen appears.
2 Press
/
to display the "Options" menu screen.
3 Press
/
to select "Video Systems", and then
press
.
4 Press
/
to select the desired video system
mode.
5 Press ENTER to save the setting.
6 To exit the menu screen, press MENU.
• When the system mode is set to "Auto", you may not receive
a clear picture due to signal differences. Should this occur,
switch to the video system of the source signal.
• "Auto" cannot be set for PAL-M and PAL-N input signals.
Select "PAL-M" or "PAL-N" in "Video Systems" menu for
PAL-M and PAL-N input signals.
This function allows you to select the image displayed
when no signal is being sent to the projector.
Description of Background Images
Selected item
Description
Blue (
)
Blue screen
None (
)
Black screen
1 Press MENU. The "Picture" menu screen appears.
2 Press
/
to display the "Options" menu screen.
3 Press
/
to select "Background".
4 Press
/
to select the background image you
want to display on the screen.
5 To exit the menu screen, press MENU.
02.11.21, 11:42 AM
Advertisement
Table of Contents
