Table of Contents
Advertisement
Adjusting the Picture
4
2, 3
On-screen Display
2, 3
On-screen Display
DT-200(E)#p26_32.p65
1, 5
1, 4
30
Adjusting the Color Temperature
This function allows for selecting the desired color
temperature from six settings. With the lower value
selected, the projected image becomes warmer,
reddish and incandescent-like while with the higher
value, the image becomes cooler, bluish and
fluorescent-like.
Description of Color Temperature
1 Press MENU. The "Picture" menu screen appears.
2 Press
/
to select "CLR Temp", and then press
.
3 Press
/
to select the desired color
temperature setting.
4 Press ENTER to save the setting.
5 To exit the menu screen, press MENU.
• Values on "CLR Temp" are only for general standard
purposes. The less the value is set to, the warmer, reddish,
incandescent-like the image becomes. The more the value
is set to, the cooler, bluish, fluorescent-like the image
becomes.
• "CLR-Temp" cannot be used in the DIGITAL INPUT mode.
Emphasizing the Contrast
This function emphasizes the bright portions of images
to obtain a higher contrast image.
Description of White Emphasis
Selected item
Description
For emphasizing the bright portions of images
ON (
)
For disabling "White Emphasis"
OFF (
)
1 Press MENU. The "Picture" menu screen appears.
2 Press
/
to select "White Emphasis".
3 Press
/
to select the desired white emphasis
setting.
4 To exit the menu screen, press MENU.
02.11.21, 11:38 AM
E-30
Advertisement
Table of Contents
