Part Names; Attaching The Lens Cap - Sharp DT-200 Operation Manual

Part Names

Numbers next to the part names refer to the main pages in this manual where the topic is explained.
Projector
Side and Rear View
Intake ventilative hole
INPUT 2 DVI digital port

Attaching the Lens Cap

After putting the lens cap strap on the lens cap, pass the other end of
the strap through the hole under the projector, next to the lens.
E-9
DT-200(E)#p08_11.pm6
48
13
12
AC socket
INPUT 1 COMPONENT
terminals (RCA)
9
15
Remote control sensor
INPUT 3 S-VIDEO terminal
(4-pin Mini DIN)
13
INPUT 4 VIDEO terminal (RCA)
02.11.21, 11:29 AM
48
Intake ventilative hole
13
RS-232C port
(Serviceman only)
13 14
DIGITAL INPUT
TYPE switch