Adjusting The Picture - Sharp DT-200 Operation Manual

Adjusting the Picture

2, 3
On-screen Display
e. g. (VIDEO input in INPUT 3 or 4 mode)
1
2
E-29
DT-200(E)#p26_32.p65
1, 4
29
You can adjust the projector's picture to your prefer-
ences with the following picture settings. To save the
settings, select a memory from 1 to 5 and OFF (see
page 32) and then adjust the settings.
Description of Adjustment Items
Selected item button
Contrast For less contrast
Brightness For less brightness
Color For less color intensity
Tint Skin tones become purplish
Sharp For less sharpness
Red For weaker red
Blue For weaker blue
CLR Temp For selecting a desired item from six color temperature
settings
For selecting a desired item from four gamma positions
Gamma
White Emphasis For switching "on" or "off" the function that emphasizes
bright portions of the image
Picture Setting For storing all items set in "Picture"
Reset All image adjustment items are returned to the factory
preset settings.
• "Color", "Tint" and "Sharp" do not appear for RGB input in
INPUT 2 mode.
• For details on "Gamma", see "Gamma Correction
Function" on page 31.
• For details on "CLR Temp", see "Adjusting the Color
Temperature" on page 30.
• For details on "White Emphasis", see "Description of
White Emphasis" on page 30.
• For details on "Picture Setting", see "Picture Setting
Function" on page 32.
1 Press MENU. The "Picture" menu screen appears.
2 Press
/ to select a specific adjustment item.
3 Press
/ to move the
adjustment item to the desired setting.
4 To exit the menu screen, press MENU.
• To reset all adjustment items, select "Reset" on the "Picture"
menu screen and press ENTER.
• "Tint" cannot be used with PAL, SECAM, PAL-M, PAL-N or
PAL-60.
• "Contrast", "Bright", "Color", "Tint" and "Sharp" cannot be
used in the DIGITAL INPUT mode.
02.11.21, 11:38 AM
button
For more contrast
For more brightness
For more color intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue
mark of the selected