Opengear SPG-8260 User Manual page 38

4 — Output Standard
This menu enables you to select the format for the output selected in Menu 3.
5 — Output Vertical Delay
This menu enables you to add extra delay to the output video in line increments. This menu is used
in conjunction with Menu 3.
6 — Output Horizontal Delay
This menu enables you to add delay to the output video in pixel increments. This menu is used in
conjunction with Menu 3.
7 — Audio Output
This menu enables you to select the function of the audio output.
8 — Audio Output Co-Timing
This menu enables you to specify the video output the audio input will follow.
9 — AES Tone
This menu enables you to assign the tone for the AES output. This option applies to the SPG-8260
only.
A — AES Level
Use this menu to adjust the audio gain over a range of ±20dB in increments of 1dB. This option
applies to the SPG-8260 only.
B, C, D, E, — Not Implemented
Menus B, C, D, and E are not implemented at this time.
F — Factory Defaults
This function enables you to return all controls to their factory default values.
To reset the card parameters to factory default values using the card-edge controls
1. Rotate SW1 to F.
The Four-Character Display displays "
2. Toggle SW2 up or down and hold for 3 seconds.
3. Release SW2.
 Holding the Bootload button for 3 seconds when on any menu other than Factory Defaults,
resets that menu to the factory default value.
38 • Card-edge Menus
Fact Def
".
SPG-8260(-W) User Guide (v5.0)