Menu Descriptions - Opengear SPG-8260 User Manual

Menu Card-Edge
Select Menu Label
6 Out H Dly
7 Aud Out
8 Aud Timing
9
c
AES Tone
A
AES Level
F Fact Def
a. This option is only available when using an SPG-8260. This is the default for the SPG-8260.
b. This is the default setting for the SPG-8260-W.
c. This option is only available when using an SPG-8260.
d. This option is only available when using an SPG-8260.
e. The default value is -20dBFS.

Menu Descriptions

This section briefly summarizes the menu parameters available in the card-edge display.
0 — Home
This read-only menu displays the product name and the slot the card is installed in the frame.
1 — Reference Source
This menu enables you to select which reference to use. The choices are Frame Reference 1 (Fr 1),
Frame Reference 2 (Fr 2), the BNC on the rear module (Local), and Internal.
2 — Reference Rate
This selects the internal reference field rate. This field is not used when the SPG-8260 is locked to an
external reference.
3 — Output Select
This menu enables you to select the output to be configured. This menu is used in conjunction with
Menus 4, 5, and 6.
SPG-8260(-W) User Guide (v5.0)
Table 8 Card-edge Menus and Items
Menu Name
Output
Horizontal
Delay
Audio Output
Audio Output
Co-Timing
AES Tone
AES Level
d
Factory Default
Item
0*-863 (PAL B)
0*-857 (NTSC)
Off
a
AES*
b
Word Clock
Video Output 1*
Video Output 2
Video Output 3
Video Output 4
Mute*
4kHz
2kHz
1kHz
500Hz
-40dBFS to 0dBFS (1dBFS increments)
Pushing up or down on the toggle switch will
reset the card to the factory default values
e
Card-edge Menus • 37