Opengear SPG-8260 User Manual page 33

Item
Reference Format
(read-only)
Reference Rate
Video Outputs - Output #
Format
Horizontal Delay
(pixel)
Vertical Delay (lines)
Output
Compatibility
(read-only)
AES Output / Word Clock Output
Output Format
SPG-8260(-W) User Guide (v5.0)
Table 6 Setup Menu Items
Parameters
# Indicates the reference format
# (read-only) This field is read-only when the card is using
one of the following as the reference source:
• the REF 1 BNC on the openGear frame
• the REF 2 BNC on the openGear frame
• the REF IN BNC on the rear module
# This field is editable when the card is using the
internal reference (selected or because a valid
reference source on the frame or the local
reference is unavailable), or is using an AES
source or Word Clock for the reference source
NTSC Black Selects the video format of the output signal
NTSC Color Bars
PAL Black
PAL Color Bars
#
a
0* to # Delay set in pixels
Delay set in lines
a
0* to #
Genlock The output video is locked in time to the
reference where a Line 1 of output is aligned
with Line 1 of the reference
Field Lock The output video is locked in time to the
reference where the first line of either Field 1 or
Field 2 in the output video is aligned with Line 1
of the reference
Clock Lock The interface sampling clock of the output video
is locked in time to the reference interface
sampling clock
The reference format does not support the
c
Incompatible
video output format and the output format
timing may be invalid
d
Off Disables the audio output on the rear module
as follows:
• 8310AR-030 and 8320AR-030: BNC 10
• 8320AR-031: BNC 9 or BNC 10
Outputs an AES signal at 48kHz. This is the
e
AES
default setting for the SPG-8260.
Word Clock Left/right clock is being output (word clock). This
is the default setting for the SPG-8260-W.
Description
b
DashBoard Menus • 33