Table of Contents
Advertisement
DashBoard Menus
This chapter briefly summarizes the menus, items, and parameters available from DashBoard
Control System for the SPG-8260(-W). The default values are noted with an asterisk (*).
Wait 30 seconds after the last setting change to ensure all changes are saved to the non-volatile
memory of the card.
Status Tabs
This section summarizes the read-only information displayed in the Status tabs. The fields in the
Status tabs vary in severity from green (valid), yellow (caution), to red (alarm). DashBoard reports
the most severe alarm for a single field. Alarm colors are noted within the tables as text set in
brackets next to the menu parameter name.
Signal Tab
Table 3 summarizes the read-only information displayed in the Signal tab.
Item
Reference Status
Reference Format
Hardware Tab
Table 4 summarizes the read-only information displayed in the Hardware tab.
Item
HW Status
SPG-8260(-W) User Guide (v5.0)
Table 3 Signal Tab Items
Parameters
OK (Green)
Indicates the presence of a valid reference
signal
Locking (Yellow)
Indicates the presence of a valid reference
signal, but the card has not locked to it yet
No Color Burst
Indicates the presence of a NTSC or PAL
(Yellow)
reference signal that does not include a valid
color burst
No reference
Indicates that no signal is detected on the
(Red)
selected reference source
Unknown (Red)
Indicates that a signal is detected, but is not
supported
#
Specifies the reference format
AES
Word Clock
Unknown
Indicates that the reference is an unsupported
format
Table 4 Hardware Tab Items
Parameters
OK
Indicates the status of the hardware
FPGA load
invalid
Description
Description
DashBoard Menus • 31
Advertisement
Table of Contents
