Replacing The Paper Roll; Recording Paper Specifications; Installing Paper Rolls - Sharp XE-A43S Instruction Manual

Replacing the Paper Roll
■ Recording paper specifications
Be sure to use paper rolls specified by SHARP.
The use of any other paper rolls than specified could cause paper jamming, resulting in register malfunction.
Paper specification
Paper width:
Max. outside diameter: 80 mm
Quality:
• Be sure to set a paper roll prior to using your register, otherwise it may cause a malfunction.
Install the paper roll in the printer. Be careful then to set the roll and cut the paper end correctly.
(How to set the paper roll)
Incorrect
■ Installing Paper Rolls
The register can print receipts and journals. For the printer, you must install the paper rolls (receipt and
journal paper rolls) provided with the register.
Print roller arm
57.5 ± 0.5 mm
High quality (0.06 to 0.08 mm thickness)
To the printer
1.
Remove the printer cover.
2.
Lift up the print roller arm of the receipt side.
3.
Set a paper roll in the paper roll cradle of the receipt side as per
the diagram.
(How to cut the paper end)
To the printer
Correct Correct Incorrect
105