Download  Print this page

General Control - Sharp DK-AP7P Operation Manual

Music system for iphone
Hide thumbs

Advertisement

DK-AP7P

General control

To turn the power on
Press the ON/STAND-BY button to turn the power on. The
POWER and E
SOUND
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode. The POWER indicator will turn off.
Note:
This unit consumes low current during stand-by mode.
However, please remove the batteries if the unit will not be used
for a long period of time.
10
STEREO SPEAKER
2.1
BUILT-IN SUBWOOFER
VOL
VOL
+
indicator will turn on.
Volume control
Press the VOL (+ or –) button to increase or decrease the
volume.
POWER indicator will be blinking when the volume reaches
maximum or minimum level.
E
control
SOUND
When ON/STAND-BY button is pressed, the E
turns yellowish orange. You are now in the E
where low bass and high frequency are automatically adjusted
according to the volume input.
To turn off E
, press the E
SOUND
E
indicator will go off.
SOUND
indicator
SOUND
mode,
SOUND
(TV OUT) button. The
SOUND

Advertisement

Table of Contents
loading

  Also See for Sharp DK-AP7P

  Related Manuals for Sharp DK-AP7P