Specifications - Pulsar PSBS 2512C Quick Start Manual

www.pulsar.pl

1.4 Specifications:

- electrical parameters (tab.3)
- mechanical parameters (tab.4)
- operation safety (tab.5)
- operating parameters (tab.6)
Electrical parameters (tab. 3)
Mains supply
Current up to
Power frequency
Supply power
Efficiency
Output voltage
Output current
Output voltage setting, escalation and keeping
time
Voltage adjustment range
Ripple
Current consumption by PSU systems
Battery charge current
Short-circuit protection SCP
Overload protection OLP
Battery circuit SCP and reverse polarity
protections
Excessive discharge protection UVP
Technical outputs:
- FAC; indicates AC power failure
- TAMPER indicates enclosure opening
F fuse
BAT
F fuse
MAIN
Mechanical parameters (tab. 4).
Enclosure dimensions
Fixation
Fitting battery
Weight
Enclosure colour
Closing
Connectors
Notes
Operation safety (tab.5).
Protection class PN-EN 60950-1:2007
Protection grade PN-EN 60529: 2002 (U)
Electrical strength of insulation:
- between input and output circuits of the PSU (I/P-O/P)
- between input circuit and PE protection circuit (I/P-FG)
- between output circuit and PE protection circuit (O/P-FG)
Insulation resistance:
- between input circuit and output or protection circuit
PSBS2512C
230V/AC (-15%/+10%)
0,3 A
50Hz
34 W
71%
11,0 V÷ 13,8 V DC – buffer operation
10,0 V÷ 13,8 V DC – battery-powered operation
2,0A + 0,5A battery charge
2,0A + 0,2A battery charge
20ms / 30ms / 10ms
12,0 V÷ 14,5 V
40 mV p-p max.
16 mA – battery assisted operation
0,2A / 0,5A - configuration with jumper I
200% ÷ 250% of supply power – current limitation and/or
fuse damage in the battery circuit (fuse-element replacement
required)
110% ÷ 150% (@25ºC) of power supply - limitation with the
PTC automatic fuse, manual restart (the fault requires the
disconnection of the DC output circuit)
3,15A - current limitation, F
element replacement required)
U<10,0 V (± 5%) – disconnection of (- BAT) battery,
by the P
- R-relay type, 1A@ 30Vdc/50Vac max.
time lag about 5s/140s/1040s/2h20m30s (+/-5%)
- microswitch, NC contacts (enclosure closed),
0,5A@50V DC (max.)
F3,15A / 250V
T500mA / 250V
235 x 305 x 98 (230 x 300 x 90+8) (WxHxD) [mm] (+/- 2)
205 x 275 x Φ 6 x4 pcs (WxH)
17Ah/12V (SLA) max.
2,60/2,80 kg
RAL 9003
Cheese head screw (at the front), lock assembly possible
Power-supply: Φ0,63÷2,50 (AWG 22-10)
Outputs: Ф0,41÷1,63 (AWG 26-14),
Battery output BAT: 6,3F-2,5, 30cm,
TAMPER output: wires, 30cm
Leave some space between the enclosure and the wall for the cables.
BAT
jumper
BAT
I (first)
IP20
3000 V/AC min.
1500 V/AC min.
500 V/AC min.
100 MΩ, 500V/DC
5
BAT
fuse (in case of a failure, fuse-