Pulsar PSBS 3512C Quick Start Manual

Psbs 13,8v/3a/17ah buffer, switch mode power supply unit

Advertisement

Quick Links

PSBS 3512C
v.1.0
PSBS 13,8V/3A/17Ah
Buffer, switch mode power supply unit.
EN
Edition: 2 from 16.09.2013
Supercedes the edition: 1 from 17.11.2011

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PSBS 3512C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Pulsar PSBS 3512C

  • Page 1 PSBS 3512C v.1.0 PSBS 13,8V/3A/17Ah Buffer, switch mode power supply unit. Edition: 2 from 16.09.2013 Supercedes the edition: 1 from 17.11.2011...
  • Page 2 - PSBS 3512C + LB8 6x0,5A (AWZ578 or AWZ580) + 7Ah 3. Buffer power supply unit PSBS 13,8V/12V/3A/7Ah - PSBS 3512C + RN500 (13,8V/12V) + 7Ah 4. Buffer power supply unit PSBS 13,8V/12V/3x1A/7Ah - PSBS 3512C + RN500 (13,8V/12V) + LB4 3x1A (AWZ575 or AWZ576) + 7Ah...
  • Page 3 PSBS3512C 5. Buffer power supply unit PSBS 13,8V/12V/6x0,5A/7Ah - PSBS 3512C + RN500 (13,8V/12V) + LB8 6x0,5A (AWZ578 or AWZ580) + 7Ah 6. Buffer power supply unit PSBS 13,8V/2x5V÷7,4V/2x2A/7Ah - PSBS 3512C + 2xDCDC20(2x5V÷7,4V/2x2A) + 7Ah 7. Buffer power supply unit PSBS 13,8V/5V÷7,4V/2x1A/7Ah - PSBS 3512C + DCDC20(5V÷7,4V/2A) +LB2 2x1A (AWZ585 or AWZ586) + 7Ah...
  • Page 4 PSBS3512C Fig. 2. View of the power supply PCB. Table 2. Elements of the power supply (refer to chart 3). Element no. Description Separation transformer Power-supply unit board (tab. 1, fig. 2) TAMPER; microswitches (contacts) contact of antisabotage protection (NC)
  • Page 5 PSBS3512C 1.4 Technical parameters: - electrical parameters (tab.3) - mechanical parameters (tab.4) - operation safety (tab.5) - operation parameters (tab.6) Electrical parameters (tab. 3) Supply voltage 230V/AC (-15%/+10%) Current consumption 0,39 A max. Power frequency 50Hz Supply power 49 W...
  • Page 6 PSBS3512C Operation parameters (tab.6). Operation temperature -10ºC...+40ºC Storage temperature -20ºC...+60ºC Relative humidity 20%...90%, without condensation Vibrations during operation unacceptable Impulse waves during operation unacceptable Direct insolation unacceptable Vibrations and impulse waves during transport According to PN-83/T-42106 2. Installation. 2.1 Requirements.
  • Page 7 PSBS3512C 3. The power supply operation indication. 3.1 Optical indication. The is equipped with two diodes on the front panel: RED DIODE: lights – the power-supply unit supplied with 230V AC  does not light – no 230V AC supply ...
  • Page 8 GENERAL WARRANTY CONDITIONS 1. Pulsar K. Bogusz Sp.j. (the manufacturer) grants a five-years warranty for the equipment, counted from the device’s production date. 2. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (the selection is at the manufacturer’s discretion) if the malfunction is due to the manufacturer, includes manufacturing or material defects,...

Table of Contents