Table of Contents
Advertisement
en Dishes
3.
To set a later end time, turn the rotary selector.
4.
Press
to start the operation.
a The status bar shows a notification when the opera-
tion starts. The appliance is in standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down in the status bar.
a Once the cooking time has elapsed, an audible sig-
nal sounds. A notification appears in the status bar.
5.
Once the cooking time has elapsed:
Press
to silence the audible signal manually.
‒
To set another cooking time, press
‒
the rotary selector to set the cooking time.
To continue without setting a cooking time, press
‒
.
When the food is ready, press
‒
appliance off.
11 Dishes
The "Dishes" operating mode helps you to use your ap-
pliance to prepare different meals by selecting the op-
timum settings automatically.
11.1 Cookware
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C. Glass or
glass ceramic cookware is best. The joint should cover
approx. two thirds of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
11.2 Settings for the dishes
To make the dishes perfectly, the appliance uses differ-
ent settings.
Note: The cooking result depends on the quality and
composition of the food. Use fresh and, ideally, chilled
food. Use frozen food straight from the freezer.
Tips and information about the settings
If you set a dish, the display shows relevant information
for this dish, e.g.:
¡ Suitable shelf position
¡ Suitable accessory or cookware
¡ Added liquid
¡ Time for turning or stirring
When this time is reached, a signal sounds.
To call up the information, press "Tip" or
notes are displayed automatically.
Programmes
The ideal type of heating, temperature and cooking
time are preset for programmes.
14
Cancelling the end time
The set end time can only be changed when the oven
is in standby mode.
1.
Press
a The time-setting options menu opens.
2.
Press
3.
Use the rotary selector to reset the end time to zero.
a The appliance starts to heat and the time starts to
count down.
Changing the end time
and use
The set end time can only be changed when the oven
is in standby mode
1.
Press
a The time-setting options menu opens.
to switch the
2.
Press " end".
3.
Turn the rotary selector to change the end time.
4.
Press
In order to obtain an optimal cooking result, you must
also set the weight. Unless otherwise indicated, set the
total weight for your dish. You can set the weight only
in the intended range.
Recommended settings
For the recommended settings, the optimum type of
heating is preset. The display shows the type of heat-
ing.
You can adjust the preset temperature and the cooking
time.
11.3 Overview of the dishes
You can find out which individual dishes are available
to you on the appliance when you call up the operating
mode.
The dishes are sorted by categories and food.
Category
Cakes
Bread,
bread rolls
Pizza, sa-
voury cakes
Bakes,
soufflés
. Some
Frozen
products
.
.
.
to resume operation.
Foods
Cakes in tins
Cakes on a baking tray
Small baked items
Biscuits
Bread
Bread rolls
Pizza
Savoury cakes, quiche
Bake, savoury, fresh, cooked ingredi-
ents
Fresh lasagne
Potato gratin, raw ingredients, flat
Bake, sweet, fresh
Soufflés in individual moulds
Pizza
Bread rolls
Bakes
Potato products
Poultry, fish
Advertisement
Table of Contents
