Safety Instructions - cecotec THERMOSENSE 390 CLEAR Instruction Manual

SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
- Make sure that the mains voltage matches the voltage
stated on the rating label of the appliance and that the
wall outlet is grounded.
- Do not immerse the cord, plug, or any non-removable
part of the appliance in water or any other liquid.
- Do not expose the electrical connections to water. Make
sure your hands are dry before handling the plug or
switching on the appliance.
- Never immerse the appliance in water. Do not reach into
the water!
- Check the power cord regularly for visible damage. If
the cord is damaged, it must be replaced by the official
Technical Support Service of Cecotec in order to avoid
any type of danger.
- Do not move the product or pull from it from its cord. Do
not use the cable as handle. Do not push the cord against
corners or sharp edges. Do not pass the product over
the power cord. Keep the cord away from hot surfaces.
- Do not operate the product if its cord, plug or body show
visible damage, do not operate properly or have been
dropped.
- Do not use the appliance in confined spaces with
explosive or flammable vapours.
- Do not leave the appliance unattended while in use.
Unplug it from the power supply when you finish using
it and before leaving the room.
- Do not try to repair the product by yourself. Contact the
official Technical Support Service of Cecotec.
- Always turn off and unplug the appliance when not
THERMOSENSE 390 CLEAR 7