Roland EV-1-WL Connection Manual page 2

Using the AC-22LX Editor/EV-1-WL, FS-1-WL Connection Guide
EDITOR Basic Screen
2
1
1.
Patch select area
Here you can select the PANEL patch as well as 15 other patches by combining the AIR FEEL knob setting on the AC-22LX with the MEMORY button
colors (green, red, orange).
2.
Function select area
3.
[CLEAR]/[WRITE] buttons
Click the [CLEAR] button to reset all settings to the original settings of the AC-22LX. Press the [WRITE] button to save the edited settings to the patch
select area (p. 3).
4.
Amp setting edit area
You can set the AIR FEEL for each patch to a different AIR FEEL name than the one listed in the patch select area.
5.
Rhythm box area
Lets you start/stop the rhythm box and adjust the tap tempo.
6.
Effect edit area
Here's where you configure the reverb, chorus, rhythm patterns and so on.
2
3
4
5
6