Roland FS-1-WL Connection Manual

Connect with wm-1, wm-1d

Hide thumbs Also See for FS-1-WL:

FS-1-WL Connection Guide

(Connect with WM-1, WM-1D)

This guide shows you how to pair the FS-1-WL

wirelessly to the WM-1 or WM-1D using BLE MIDI.

"Pairing" involves registering the MIDI device that

you want to use (making the devices recognize each

other) with the FS-1-WL.

Pairing the FS-1-WL with another compatible

device lets you control that device via MIDI from the

FS-1-WL.

What is "BLE MIDI"?

"BLE MIDI" is the technology used to transmit

and receive MIDI messages wirelessly via

Bluetooth®

This is officially known as "MIDI over Bluetooth Low

Energy".

LE standard.

Table of Contents

Need help?

Do you have a question about the FS-1-WL and is the answer not in the manual?

Page 1 FS-1-WL Connection Guide (Connect with WM-1, WM-1D) © 2022 Roland Corporation This guide shows you how to pair the FS-1-WL wirelessly to the WM-1 or WM-1D using BLE MIDI. “Pairing” involves registering the MIDI device that you want to use (making the devices recognize each other) with the FS-1-WL.
Page 2 FS-1-WL is STANDARD (Host) mode. Connect the WM-1 to the MIDI device and set it to STANDARD (Host) mode. Power up the FS-1-WL in MIDI mode, and place it near the WM-1. Press the [Bluetooth] (INSTRUMENT) button on the FS-1-WL.
Page 3 WM-1, or when turning off the power while the Bluetooth indicator is blinking white (not connected), or when doing a factory reset of the FS-1-WL, the unit does not pair automatically. In this case, you must start from step 1 to...
Page 4 FS-1-WL is STANDARD (Host) mode. Connect the WM-1D to your computer, and set it to STANDARD (Host) mode. Power up the FS-1-WL in MIDI mode, and place it near the WM-1D. Press the [Bluetooth] (INSTRUMENT) button on the FS-1-WL.
Page 5 WM-1D, or when turning off the power while the Bluetooth indicator is blinking white (not connected), or when doing a factory reset of the FS-1-WL, the unit does not pair automatically. In this case, you must start from step 1 to...