urmet domus 1096 User Manual page 14

MENU ITEMS DESCRIPTION
This function lets you vary the options of the camera optics. Select this menu item to access the following
submenus:
BRIGHTNESS
EXPOSURE MODE
FLC
BLC
GAIN
RETURN
BRIGHTNESS
This varies the brightness of the image on the monitor. Values can be set from 1 to 20.
BACKLIGHT - BACK LIGHT COMPENSATION
An object with a strong light in the background usually appears dark and not so visible if compared with the
rest of image. The BACKLIGHT function allows to solve this problem and obtain a good compensation in
the selected area (defined by position and dimension) increasing the brightness if the area appears dark or
reducing it if too clear.
The values which can be set for this function are:
•
GLOBE: this is used to back-light on the entire image
•
BLC (COMPENSATED BACKLIGHT): this is used to back-light the entire image, but with
programmable levels using the LV parameter (see below).
•
CENTER: this is used to back-light mainly the middle of the image
•
FLC (FRONT COMPENSATION): In this case, operation is triggered when light is frontal
FLC Level
This is only present if BLC, in EXPOSURE MODE is selected. This is only used to select the front control
level. Values can be set from 1 to 8.
BLC Level
This is only present if BLC, in EXPOSURE MODE is selected. This is only used to select the backlight
control level. Values can be set from 1 to 8.
GAIN - AUTOMATIC GAIN CONTROL
This is used when the camera frames images in low lighting conditions. Values may vary from 1 to 8.
This function is used to select white balancing mode. Select this menu item to choose among the options in
the table.:
14
EXPOSURE
9
BLC
3
3
2
WB -
WHITE BALANCING
AE
DS1096-008