Attaching A Smartphone To The Selfie Stick; Taking Selfies; Using The Mini Tripod - Silvercrest 406210 2207 Operating Instructions Manual

Attaching a smartphone to the selfie stick
♦ Pull the clamps of the smartphone holder 2 open.
♦ Place the smartphone between the clamps of the smart-
phone holder 2 by pushing the upper clamp upwards
against the spring force. Check that your smartphone is
securely in place.
♦ Loosen the locking screw 3 and adjust the vertical tilt angle
of the smartphone. Fix the smartphone in the desired posi-
tion by re-tightening the locking screw 3.
♦ If necessary, attach the remote release 8 to the lower part of
the telescopic shaft 4 using the remote release holder r.
Taking selfies
♦ Release the lock of the telescopic shaft 4 by turning it
anticlockwise.
♦ Pull out the telescopic shaft 4 to the desired length. Turn the
individual elements of the telescopic shaft 4 clockwise to
lock them in place.
♦ If you want to unlock the telescope shaft 4 again, turn the
individual elements in the opposite direction (anticlockwise).
♦ Switch on the camera function on your smartphone.
♦ Press the
smartphone will take a picture. The operating LED 0 briefly
flashes blue once.
NOTE
► If the button q is not pressed for approx. 6 minutes, the
remote release 8 switches off automatically.

Using the mini tripod

♦ Screw the mini tripod 1 into the ¼ inch thread 7 on the
bottom of the handle 5.
♦ Always pull the legs of the mini tripod 1 fully apart for
maximal stability.
│ GB │ IE
■ 10
button q on the remote release 8. Your
SSBS 3.0 A2