Attaching A Smartphone To The Selfie Stick - Silvercrest SSBS 3.0 A1 Operating Instructions Manual

NOTE
► The next time you switch on the device, the remote
release
smartphone. If your smartphone does not automatically
connect to the remote release , you must establish the
connection manually. You can find a detailed description
of how to do this in the operating instructions for your
smartphone.
► If you want to connect another smartphone to the remote
release , press and hold the
2 seconds. The operating LED briefly flashes blue twice
and then continues to flash every second. The remote
release
can now be connected to another smartphone.
Attaching a smartphone to the selfie stick
♦ Pull the clamps of the smartphone holder
♦ Place the smartphone between the clamps of the smart-
phone holder
against the spring force. Check that your smartphone is
securely in place.
♦ Loosen the locking screw
of the smartphone. Fix the smartphone in the desired posi-
tion by re-tightening the locking screw .
♦ If necessary, attach the remote release
the telescopic shaft
│ GB │ CY
■ 10
will connect automatically to the last-connected
is now in pairing mode for about 1 minute and
by pushing the upper clamp upwards
using the remote release holder .
button
and adjust the vertical tilt angle
to the lower part of
for about
open.
SSBS 3.0 A1