Silvercrest 406210 2207 Operating Instructions Manual page 12

♦ Press and hold the
switch on the remote release 8. The operating LED 0 lights
up red once and then flashes blue every second. The remote
release 8 is now in pairing mode for approx.
1 minute. If you do not make the pairing within 1 minute,
the remote release 8 switches off automatically.
Activate the Bluetooth
♦
search for Bluetooth
description of how to do this in the operating instructions for
your smartphone.
Select the entry SSBS 3.0 A2 from the list of found devices
♦
on your smartphone to pair the two devices. If the connec-
tion is successful, the operating LED 0 goes out.
♦ To switch off the remote release 8, press and hold the
button 9 for approx. 3 seconds. The operating LED 0 briefly
flashes red three times before going out completely.
NOTE
► The next time you switch on the device, the remote
release 8 will connect automatically to the last-connected
smartphone. If your smartphone does not automatically
connect to the remote release 8, you must establish the
connection manually. You can find a detailed description
of how to do this in the operating instructions for your
smartphone.
► If you want to connect another smartphone to the remote
release 8, press and hold the
2 seconds. The operating LED briefly flashes blue twice
and then continues to flash every second. The remote
release 8 is now in pairing mode for about 1 minute and
can now be connected to another smartphone.
SSBS 3.0 A2
button 9 for about 3 seconds to
®
function on your smartphone and
®
devices. You can find a detailed
button e for about
GB │ IE │
9 ■