Product Features; Safety Instructions - EuroLite LED TL-4 User Manual

Product features

Variable truss light and uplight with bright 4 x 8 W RGB+UV LED
Compact and bright, making it perfect for truss installation
•
Equipped with 4 x 8 W 4in1 RGB+UV LED in the colors red, green, blue and UV
•
DMX-controlled operation or stand-alone operation with Master/Slave function
•
3, 4-1, 4 or 8 DMX channels selectable
•
Built-in auto and music show programs
•
Direct color selection for 18 preset colors
•
Functions: static colors, stepless RGB+UV color mixture, internal programs, dimmer, strobe effect with
•
variable speed, sound-control, Master/Slave operation
Sound-control via built-in microphone with adjustable microphone sensitivity
•
Flicker-free projection
•
Supports QuickDMX - the wireless DMX system from Eurolite
•
Built-in phantom-powered USB port for QuickDMX receivers (accessories)
•
DMX control via any standard DMX controller
•
Addressing via control panel with 4-digit LED display
•
Convenient wireless control via included IR remote control EUROLITE IR-7
•
Ideal for booth construction, stages and anywhere trussing is used
•
Perfect for ALUTRUSS 4-POINT SYSTEM QUADLOCK
•
Hanging as well as standing installation possible
•
M10 threaded insert for suspended installation
•
Folding foot adjustable in 5 steps for flexible placement
•
Additional rubber feet when the spot shall be positioned on the floor
•
Ready for connection via included power cable with safety power plug
•
Feed-through output allows to power up to 8 devices
•

SAFETY INSTRUCTIONS

WARNING!
Please read the safety warnings carefully and only use the product as describe in this manual to
avoid accidental injury or damage.
Intended use
• This device is an LED truss light for creating decorative lighting effects. This device is designed for
professional use in the field of event technology, e.g. on stage. It is not suitable for household lighting.
• Only use the device according to the instructions given herein. Damages due to failure to follow these
operating instructions will void the warranty! We do not assume any liability for any resulting damage.
• We do not assume any liability for material and personal damage caused by improper use or non-
compliance with the safety instructions. In such cases, the warranty/guarantee will be null and void.
• Unauthorized rebuilds or modifications of the device are not permitted for reasons of safety and render the
warranty invalid.
Danger due to electricity
• The device is suitable for indoor use only. Do not use it outdoors. Never expose it to rain or moisture. Do
not store it in rooms exposed to moisture.
• To reduce the risk of electric shock, do not open any part of the device. There are no serviceable parts
inside the device.
• Only connect the device to a properly installed mains outlet. The outlet must be protected by residual
current breaker (RCD). The voltage and frequency must exactly be the same as stated on the device. If the
mains cable is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never defeat the protective ground of a mains cable. Failure to do so could result in damage to the
device and possibly injure the user.
• The mains outlet must be easily accessible so that you can unplug the device quickly if need be.
• Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock.
• The mains cable must not be bent or squeezed. Keep it away from hot surfaces or sharp edges.
• Never pull the mains cable to disconnect the mains plug from the mains outlet, always seize the plug.
• Unplug the device during lighting storms, when unused for long periods of time or before cleaning.
18/32 00122447, Version 1.0