Table of Contents
Advertisement
48955 Rev1
23/5/06
Cleaning your
kitchen machine
Before cleaning and maintenance,
switch the appliance off and
unplug from the mains.
1
Remove all attachments. All
attachments can be washed in
warm soapy water. Ensure that
they are thoroughly dried.
2
Wipe the outside of the mixer with
a damp cloth, then leave to air
dry. Never use abrasives or
immerse in water.
3
Wash the bowl in hot soapy
water. After cleaning re-fit the
bowl. This will keep the mixer
head mechanism covered.
4
Fill the blender with warm water,
fit the lid and goblet, then switch
on to MAX for 20-30 seconds.
Empty then rinse. Wipe then leave
to air dry.
•
Do not leave the blender in water
to soak or leave water in the
blender.
11:45
Page 11
Top tips
If the mixer stops during
operation, it is because the unit
has overheated due to
overloading and the protection
device has activated.
Switch the mixer off and unplug
from the mains.
Remove some of the ingredients
to reduce the load. Let the
machine cool down for 3 minutes.
Plug the unit back in, then
reselect the speed and continue
to use. If the mixer does not
restart immediately, allow to stand
for additional time, then retry.
If the unit is still not working call
the helpline for further advice.
DEDICATED
HELPLINE
If you have any difficulty with your
appliance, do not hesitate to call.
We are more likely to be able to
help than the store from where
you bought it.
Please have the following
information ready to enable our
staff to deal with your enquiry
quickly:
•
Name of the product
•
Model number as shown on the
underside of the appliance or
rating plate
•
Serial number
UK Helpline
Replacement Parts
Ireland Helpline
www.morphyrichards.com
0870 060 2609
0870 167 6640
1800 409119
11
Advertisement
Table of Contents
