Lock Ring; Care And Cleaning - Morphy Richards Supreme Precision 10 in 1 Multicooker Instructions Manual

562000 Rev2.qxp_Layout 1 19/01/2015 09:25 Page 27
Chopping Blade (13)
The Chopping Blade is ideal for use with a wider
range of foods than the Serrator blade, at higher
speeds it should be used with the Measuring Cap
(1) inserted into the Lid
• Speed 4-5 For mixing cake mix,
whisking/mixing batters etc.
• Speed 6-8 For blending various foods.
• Speed 9-10 For chopping hard, dry food (e.g.
Parmesan cheese, biscuits or dry bread), or for
blending or mixing.
• Pulse For chopping foods while controlling the
size of the dice.
Spatula (18)
During normal use, food may adhere to the sides
of the Jug. It may be necessary to scrape the
sides of the Jug down partway through cooking
using a silicone spatula, wooden spoon or the
plastic spatula supplied with your Multicooker.
DO NOT USE METAL UTENSILS IN THE
MULTICOOKER, DOING SO MAY DAMAGE THE
COOKING SURFACE.

Lock Ring

• The Drive Shaft (14)
removed for ease of cleaning and to prevent food
from sticking underneath the seal within the base
of the Jug (4). The Drive Shaft is locked into place
using a Lock Ring (15).
To remove:
1. ENSURE THERE ARE NO ATTACHMENTS IN
THE JUG, AND THE JUG IS COOL TO TOUCH.
2. Turn the Jug upside down and turn the lock ring
anti clockwise.
3. After the first 'click' hold the drive shaft and
continue to twist the Lock Ring 45 degrees and
remove. The Drive Shaft can now be removed
from the Jug for cleaning.
• To replace insert the Drive Shaft into place and
replace the Lock Ring underneath the Jug. Twist
clockwise until it 'clicks' and the Drive shaft is
locked into place.
(2) to prevent splashing.
within the Jug can be

Care And Cleaning

• Allow the Jug (4) and any accessories used to
cool completely before cleaning.
• The Lock Ring (15) and Drive Shaft
removed as detailed above for easy cleaning.
• If any residue remains in the Jug, with the Drive
Shaft in place, insert hot soapy water and leave to
soak for 15 minutes.
• Important: Do not submerge the outer base of
the Jug in water.
• If attached, remove the Blade Covers
the Serrator Blade (12) and Chopping Blade (13).
WARNING: BLADES ARE SHARP
• Wash the Measuring Cap (1), Lid (2), Mixing
Paddle (11) Steaming Basket (10), Lid Gasket
(16), Blade Covers (17) and Spatula
soapy water. Wash the Serrator and Chopping
Blades (12), (13) using the Cleaning Brush
and holding them from the top to avoid cutting
yourself.
• Carefully wash the inside of Jug
Shaft (14) with warm soapy water.
• Dry carefully.
• DO NOT SUBMERGE THE JUG IN WATER OR
WET THE CONTACTS ON THE BOTTOM OF
THE JUG.
• Wipe the Main unit with a damp cloth.
• Dry carefully all the washed parts.
• No parts are dishwasher safe.
Replacing the Lid Gasket (16)
• During cleaning you may need to remove the Lid
Gasket from the Lid. Simply grip the silicone Lid
Gasket and gently pull to remove.
• To replace, ensure the arrows that are moulded
on the Lid Gasket are directed towards the lid.
Push around the outside of the moulded ring on
the underside of the Lid, until fully located in the
groove.
• The Lid Gasket may discolour during use.
This is normal.
(14) can be
(17) from
(18) in warm
(20)
(4) and Drive
27