11�13 Io-Link; Menu - Keller CellaTemp PX1 Series Manual

Operating instructions CellaTemp PX 1x 2x 3x
11.13 IO-Link
This device has an IO-Link communication interface, which requires an IO-Link-
capable module (IO-Link master) for operation� The IO-Link interface allows direct
access to process and diagnostic data and offers the possibility to parameterize
the device during operation� The IODDs required for configuring the IO-Link device
as well as detailed information on process data set-up, diagnostic functions and
parameter addresses are available in the download area at www�keller�de/its�
For IO-Link operation a 3-wire cable port Class A (Type A) must be used�

12 Menu

12.1 Analogue output Ao
8888
Ao
dI
d2
S
EF
Mode
Run
Mode
Mode
End
Ao . S
Ao .Fn
Ao .SP
Ao .EP
End
Mode
26
Ao