Advertisement
Quick Links
Advertisement
Related Manuals for Keller PYRO CellaTemp PX 1 Series
Summary of Contents for Keller PYRO CellaTemp PX 1 Series
- Page 1 PYROMETER CellaTemp ® PX 1x, 2x, 3x Ident no.: 1117997 05/2022...
- Page 3 This guide gives you the minimum information to properly install the pyrometers of the PX se- ries. For detailed information please refer to the user guide CellaTemp PX. You can download it under the following link: https://www.keller.de/en/its/mediacenter/manuals.htm Explanation of symbols Important safety-related references in this manual are marked with a symbol.
-
Page 4: Installation
Quick Start Guide CellaTemp PX 1x, 2x, 3x ► Switch to neutral and verify absence of voltage ► Connect the instrument according to the following schematic: Pin 1 BN (brown) L+ (power supply 24V DC) Open Collector switching output; Imax = 150 mA Pin 4 BK (black) or IO-Link OUT 1... - Page 5 Quick Start Guide CellaTemp PX 1x, 2x, 3x Best – target larger than the spot size Good – target equal to the spot size Incorrect – target smaller than the spot size 4. Turn on the power supply of the pyrometer. 5.
- Page 6 These devices can be returned for disposal to the manufacturer or they must be disposed properly by the user. For the improper disposal of the device by the user, the company KELLER HCW is not responsible. is a registered trademark of the IO-Link corporate community.
- Page 8 Copyright prohibits the reproduction or distribution of this instruction manual, in- cluding text, photographs or images contained herein, in whole or in part, for any purpose whatsoever, without prior consent of the author. This applies to any form of mechanical or electronic reproduction as well as to electronic transmission in any form through any medium.