Table of Contents
Advertisement
3
WORK
3.11
Mounting the seat
3.12
Installing the battery
3.13
Charging the battery
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks and open flames away from the battery. Only charge in well-ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least
15 minutes and contact a physician.
Warning
Environmental hazard The battery contains elements that are harmful to the environment.
–
Do not discard batteries with the household waste. Dispose of faulty batteries in an environmentally compatible manner.
Give the battery to your authorized KTM dealer or dispose of it at a collection point for used batteries.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
–
Hook in the front of the seat at the collar sleeve of the fuel tank, lower it at the rear
and simultaneously push it forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten the screw of the seat fixing.
Guideline
Remaining screws, chassis
M00176-10
Main work
–
Insert the battery into the battery compartment with the terminals facing forward.
Battery (YTX5L-BS)
–
Reconnect rubber band
–
Position positive cable
Guideline
Screw, battery terminal
Info
Contact disk
with the claws facing down.
–
Slide positive terminal cover
–
Position the negative cable
Guideline
Screw, battery terminal
M00233-10
Info
Contact disk
with the claws facing down.
Finishing work
–
Install the air filter box lid.
–
Mount the seat. (
M6
.
and mount and tighten the screw.
M5
must be mounted between screw
over the positive terminal.
and mount and tighten the screw.
M5
must be mounted between screw
p. 13)
13
10 Nm (7.4 lbf ft)
2.5 Nm
(1.84 lbf ft)
and cable lug
2.5 Nm
(1.84 lbf ft)
and cable lug
Advertisement
Table of Contents
