KTM 450 EXC EU 2015 Setup Instructions page 10

3 WORK
3.1 Raising the motorcycle with the lift stand
3.2 Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
3.3 Removing headlight mask with headlight
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (54829055000)
The wheels should no longer touch the ground.
–
Secure the motorcycle against falling over.
401942-01
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
the motorcycle on it.
Info
While riding, the side stand must be folded up and secured with the rubber
band.
401943-10
(all 450 models, EXC AU, EXC EU, EXC SIX DAYS, XC-W)
–
Switch off all electrical equipment.
–
Remove screw
–
Release rubber straps
M00143-10
–
Detach electrical plug-in connector
the headlight.
M00127-10
(500 EXC US)
–
Switch off all electrical equipment.
–
Remove screw
–
Release rubber straps
M00188-10

to the ground with your foot and lean

and take off the clamp.

. Slide the headlight mask up and swing it forward.
 and take off the headlight mask with

and take off the clamp.

. Slide the headlight mask up and swing it forward.
8