Table of Contents
Advertisement
Overview
1
3
5
7
9
For More Information
40-Gb Network Module
The following figure shows the front panel of the 40-Gb network module (FPR4K-NM-4X40G.) The
FPR4K-NM-4X40G is a single-wide module that supports hot swapping. The four ports are numbered left to
right.
Note
Note
Captive screw/handle
Ethernet X/3
Ethernet X/7
Ethernet X/4
Ethernet X/8
• For a list of copper SFPs, see
Make sure you have the correct firmware package and software version installed to support this network
module. For instructions on how to verify your firmware package version and to upgrade the firmware if
necessary, see the
Cisco Firepower 4100/9300 FXOS Firmware Upgrade
FXOS Compatibility
for the software compatibility matrix.
The FPR4K-NM-4X40G is NEBS-compliant.
2
Ethernet X/1
4
Ethernet X/5
6
Ethernet X/2
8
Ethernet X/6
Network activity LEDs
10
Supported SFP/SFP+ and QSFP Transceivers, on page
Cisco Firepower 4112, 4115, 4125, and 4145 Hardware Installation Guide
40-Gb Network Module
• Off—No connection or port is not in use.
• Amber—No link or network failure.
• Green—Link up.
• Green, flashing—Network activity.
Guide. See
Cisco Firepower 4100/9300
25.
13
Advertisement
Table of Contents
