Pulsar S94 Installation Manual


9 p 10/100 Mb/s ports

4 PoE ports (data transfer and power supply)

15,4W for each PoE port, supports devices
complaint with the IEEE802.3af standard

Supports auto-learning and auto-aging of MAC
addresses (1K size)

LED indication

1. Technical description

1.1. General description.

S94 is a 9-port PoE switch designed to supply IP cameras operating in IEEE 802.3af standard. Automatic
detection of any devices powered in the PoE standard is enabled at the 1 – 4 ports of the switch. The UPLINK port is
used for connection of another network device. The LEDs at the front panel indicate the operation status (description in
the table below).
The PoE technology ensures a network connection and reduces installation costs by eliminating the need to supply a
separate power cable for each device. This method allows supplying other network devices, such as IP phone, wireless
access point or router.
The S94 9-port switch for 4 IP cameras
Edition: 1 from 01.09.2015
Supercedes the edition: --------------
Features:
 The PSD 480125 48VDC/1,25A/60W max.
 Additional assembly elements
 warranty – 2 year from the production date
Example of use of the power supply Switch.
S94
v1.0
power supply desktop type included
PL EN**