Nice Era Fit S Instructions And Warnings For Installation And Use page 5

Application types and operating requirements
Vertical roller awning
Arm awning
Shutter
• with automatic stop in the upper limit
switch position "0" (with box)
Limit switch
programming:
• without containment mechanical con-
straints in the upper limit switch "0"
...if it is necessary to reduce the impact
Functions available...
force when closing
• with automatic stop in the upper limit
switch position "0" (with box)
Limit switch
programming:
• without containment mechanical con-
straints (square bar or similar)
...to stretch the canvas: "FRT" function
Functions available...
...if it is necessary to reduce the impact
force when closing
• with springs and caps
• with springs but without caps
Limit switch
programming:
• without springs but with caps
• without mechanical constraints
Recommended programming
Programming in semiautomatic mode
(paragraph 5.7)
Programming in manual mode (paragraph
5.6)
Adjustment of the motor traction force
("RDC" function – paragraph 5.11)
Programming in semiautomatic mode
(paragraph 5.7)
Programming in manual mode (paragraph
5.6)
Programming the "FRT" function (paragraph
5.12)
Adjustment of the motor traction force
("RDC" function – paragraph 5.11)
Programming in manual mode (paragraph
5.6)
English – 4