Safety Guidelines - ADJ ACCU-STAND LTS2 AS User Manual

S A F E T Y G U I D E L I N E S
To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual. ADJ
PRODUCTS LLC is not responsible for injury and/or damages resulting from the misuse of these devices due
to the disregard of the information printed in this manual. Only qualified and/or certified personnel should per-
form installation of these devices and only the original rigging parts included with these devices should be used
for installation. Any modifications to these devices and/or the included mounting hardware will void the original
manufacturer's warranty and increase the risk of damage and/or personal injury.
THERE ARE NO USER SERVICEABLE PARTS INSIDE THESE DEVICES.
DO NOT ATTEMPT ANY REPAIRS YOURSELF, AS DOING SO WILL VOID YOUR MANUFAC-
TURER'S WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO THIS STAND
AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL
VOID THE MANUFACTURER'S WARRANTY AND ARE NOT SUBJECT TO ANY WARRANTY
CLAIMS AND/OR REPAIRS.
NEVER SET UP OR INSTALL STAND ON UNEVEN SURFACE!
NEVER INSTALL OR MOUNT STAND IN UNSTABLE LOCATIONS!
SPREAD THE LEGS UNTIL THE STAYS EXTEND HORIZONTALLY!
NEVER REMOVE THE SAFETY PIN WHEN THE A KNOB IS LOOSE!
BE CAREFUL NOT TO OVEREXTEND THE INNER PIPE!
KEEP FLAMMABLE MATERIALS AWAY FROM THE STAND
MAX LOAD CAPACITY PER STAND IS 132.3 LBS. (60 KGS)
INDOOR / DRY LOCATIONS USE ONLY!
DO NOT EXPOSE DEVICES TO RAIN AND/OR MOISTURE!
WHEN USING STAND OUTSIDE UNDER STRONG WIND, TAKE APPROPRIATE MEASURES
TO AVOID TIPPING!
TIGHTEN EACH KNOB AND BOLT SECURELY!
AVOID USING BRUTE FORCE WHEN INSTALLING.
ONLY USE RECOMMENDED RIGGING HARDWARE AS DESCRIBED IN THIS GUIDE.
USE THE ORIGINAL PACKAGING AND MATERIALS TO TRANSPORT FOR SERVICE.
DO NOT POSITION STAND CLOSE TO ANY FLAMMABLE MATERIALS WHILE OPERATING.
DO NOT ATTEMPT INSTALLATION OF STAND IF YOU LACK THE RELEVANT KNOWLEDGE
OR EXPERTISE.
6