PRO SIGNAL PSG3083 Manual

Hdmi over cat6/6a/7 extender

Advertisement

HDMI OVER Cat6/6a/7 EXTENDER
PSG3083
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PSG3083 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PRO SIGNAL PSG3083

  • Page 1 HDMI OVER Cat6/6a/7 EXTENDER PSG3083 The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
  • Page 2 IMPORTANT SAFETY INFORMATION Please read these instructions carefully before use and retain for future reference. • When using electrical appliances basic safety precautions should always be followed. • Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the power supply to the mains power supply.
  • Page 3 • Plug the IR-TX extender into the IR-IN port of the transmitter. Direct the extender head towards the remote control sensor on the source device. • Connect an HDTV to the receiver output port using a quality HDMI cable. • Plug the IR-RX extender into the IR-IN port of the receiver.
  • Page 4 RS232 SERIAL BI-DIRECTION PASSBACK FUNCTION. RS232 serial bi-direction passback function. • Supports baud rates of 4800, 9600, 19200, 28800, 38400, 57600 and 115200 and all devices must be set to the same rate. • Check the serial cable connections are as shown here: •...

Table of Contents