Pc Based Feature Programming / Firmware Updates (Optional); Dome Light Delay / Theater Dimming - Code Alarm PROFESSIONAL Series Installation Manual

PC Based Feature Programming / Firmware Updates (optional)

When using the NEW Code Alarm Utility App along with a VEPROG Programming
tool you may program selectable features or update the firmware of this module.
To Use a PC and VEPROG tool for Feature Programming or Firmware Updates:
1. Download and install the Code Alarm Utility App. from the VoxxTech / Software
Downloads section of voxxuniversity.com (login required)
2. Launch the Code Alarm Utility App.
3. Connect the VEPROG to your PC via the USB port.
4. Connect the VEPROG to the Code Alarm Module.
5. Select the features you wish to change or update firmware if needed.

Dome Light Delay / Theater Dimming

When the Dome Light Delay is set to "Program Custom Time" in feature
programming (this is the default setting)
arming after the lock button is pressed for vehicles with a dome light delay or theater
dimming feature. Once programed the system will 'learn' the timing of the dome light
delay (60 second max) and add 2 seconds before arming.
1. Close all doors with ignition off.
2. Using the transmitter press LOCK, UNLOCK, LOCK ,UNLOCK, LOCK ,
UNLOCK, LOCK. The LED will light solid to indicate the system has
entered DOME DELAY LEARN MODE.
3. Immediately OPEN then CLOSE the door WITHOUT disarming the
system. The system will then monitor the door trigger wire. Once the
dome light turns off, the system will then add 2 seconds and then exit
the learning mode.
4. The LED will begin to flash indicating the system has exited the
learning mode and is now armed.
Note: To program a custom delay time Feature Bank 2, Feature 16, "Dome Light
Delay: Preset Time or Programmable, must be set to "OFF/Program Custom Time".
Defaulting the Dome Light Delay: Turn the ignition ON then OFF 3 times then
press and hold the valet button for 5 seconds, the system will chirp 1 time indicating
the learned delay time has been cleared.
16
t
he system can be programed to delay
ca1045 rev B