Code Alarm Professional Series Owner's Manual
  1. Manuals
  2. Brands
  3. Code Alarm Manuals
  4. Car Alarm
  5. PROFESSIONAL SERIES
  6. Owner's manual

Code Alarm Professional Series Owner's Manual

Hide thumbs Also See for Professional Series:
Table of Contents

Advertisement

Quick Links

Download this manual
PROFESSIONAL
SERIES
Owner's Guide
For Models:
caSECRS
&
Factory Remote
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR
SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.
2019 Voxx Electronics Corporation. All rights reserved.
1

Advertisement

Table of Contents
loading

Related Manuals for Code Alarm Professional Series

Summary of Contents for Code Alarm Professional Series

  • Page 1 PROFESSIONAL SERIES Owner’s Guide For Models: caSECRS & Factory Remote IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply.

  • Page 2: Table Of Contents

    Table of Contents Using Your Remote Control ..............3 Arming the Security System .............. 3 Disarming the Security System ............3 Manually Overriding the Security System ......... 3 Valet Mode ..................3 Using Your Remote Vehicle Starter ............4 Remote Starting Your Vehicle ............4 Remote Start Shutdown ..............

  • Page 3: Using Your Remote Control

    Using Your Remote Control Arming the Security System To arm the system, exit the vehicle, close all doors, then press the button. The parking lights will flash 2 times, indicating the system is armed, has locked the doors (if equipped and connected) and activated the starter disable feature. The LED status indicator, if installed, will blink steadily, once per second.

  • Page 4: Using Your Remote Vehicle Starter

    Using Your Remote Starter Remote Starting Your Vehicle To activate the remote start function, use the button sequence checked below. The system will sound, the parking lights will flash 1 time and the system will check the vehicle to ensure it is safe to start. If all safety parameters are correct, the vehicle will start.

  • Page 5: Remote Start Safety Features

    Remote Start Safety Features For safety and security reasons, the system will shutdown or prevent the remote vehicle starter from activating if any of the following occur: The vehicle’s hood is open. The brake pedal is pressed prior to turning the ignition key to the ON position.

  • Page 6: Status Led, Light Flashes And Siren/Horn Indications

    Status LED, Light Flashes, and Siren/Horn Indications Status LED Flash Indications - ( If Equipped ) LED Flashes Function Disarmed Slow Flash Armed Fast Flash Passive Arming Countdown ON (Solid) Valet Mode 2 Flashes Zone 2 Trigger, Hood / Trunk 3 Flashes Zone 3 Trigger, Door 4 Flashes...

  • Page 7: Warranty Information

    LIMITED LIFETIME WARRANTY Applies to Code Alarm Series Control Modules, Sirens, Sensors, and Relays. Voxx Electronics Corporation (the Company) warrants to the original purchaser of this product that should this product or any part thereof, (other than transmitters) under nor-...
  • Page 8 Voxx Electronics Corporation. Customer Service 1-800-421-3209 WWW.CODE-ALARM.COM FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.

This manual is also suitable for:

Professional casecrsProfessional factory remote

Table of Contents