Acceptance Test - Yale Luna Pro+ Installation Manual

2.7 Acceptance test

After the installation of the product is completed, please conduct an acceptance test.
1. Power on and change the administrator password
2. Front body and main body are parallel with the side jamb
3. Test and verify the connection and the installation of the manual thumb turn, mechanical
key override and unlock/lock button
4. Test and verify the functionality of the deadbolt from both the front body and the back
body
5. Pull the front body handle hard and ensure no false tampering alarm is triggered
6. Check the door panel condition, ensure no swaying after the deadbolt is protruded into
the side jamb
7. Check the functionality of credentials: PIN code, FaceScan (Yale Luna Pro+ only),
fingerprint scan, CPU card.
8. Check the functionality of other components (networking modules, if any)
Note
Do not conduct the acceptance test with the door closed (except step 6)
19