WH-1000XM4
2-20. HOUSING (L) BLOCK, AORI CUSHION-1 (L-ch)
• Continued on 2-21 (page 44).
1 Remove the relay
cable from the rib.
(See Fig. R)
MAIN L board
2 Draw the relay cable connector out
of the connector in MAIN L board.
(See Fig. Q)
Note: Pull out the connector horizontally so that the connector
does not get damaged or get detached from the relay
cable connector. Also, do not hold and pull by the cable
because the cable may detach from the connector.
43
–
L-ch
–
Attach in order from 1 to 3.
rib
MAIN L board
1 Insert the connector gently.
(The [blue] wire is "B" mark side)
2 Press in the connector
"B" mark
NG
Connector
cracked.
3 Press.
(No slack and fully inserted)
Sony CONFIDENTIAL
For Authorized Servicer
horizontally.
[blue]
NG
Cable is
detached.
rib
relay cable
SYS SET