How To Install The Earpad Assy - Sony WH-1000XM4 Service Manual

WH-1000XM4
Ver. 1.1
2-3.

HOW TO INSTALL THE EARPAD ASSY

Attach in order from 1 to 6.
(L-ch)
1 Align the two ribs and two holes.
Note 1: When installing the earpad assy,
hole
hole
housing block
(L-ch)
2 Press the earpad assy to the housing block until
sound that claws of the earpad firmly catch in
the hooks of the housing block from the six claws
position is heard.
Press.
4 Insert three fingers into the inner side
of the earpad assy (left side), and lift
the earpad assy to the outer side to
remove wrinkles.
left side
26
make the position of wearing
detection window.
rib
rib
earpad assy
Press.
Press.
Press.
Press.
Press.
5 Insert three fingers into the inner side
of the earpad assy (top side), and lift
the earpad assy to the outer side to
remove wrinkles.
top side
(R-ch)
1 Align the two ribs and two holes.
hole
hole
housing block
(R-ch)
3 Insert three fingers into the inner side of
the earpad assy (lower side), and lift the
earpad assy to the outer side to remove
wrinkles.
6 Insert three fingers into the inner side
of the earpad assy (right side), and lift
the earpad assy to the outer side to
remove wrinkles.
Note 2: Before performing steps 3 to 6 , make sure that the claws
of the earpad are firmly locked to the housing block.
Note 3: In steps 3 to 6 , wrinkles on the earpad resulting from
customer use cannot be removed.
Sony CONFIDENTIAL
For Authorized Servicer
rib
rib
earpad assy
lower side
right side
SYS SET