Tips For A Hotter Coffee; Coffee Pot; Making Cappuccinos And Milk-Based Beverages; Filling And Attaching The Milk Container - DeLonghi DINAMICA plus Instructions For Use Manual

Please note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation during the initial phase of coffee
preparation.
If the coffee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coffee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coffee could be delivered
a drop at a time).
The effect of the adjustment will be noticed only after making
a further 2 cups of coffee, at least. If this adjustment does not
produce the desired result, turn the dial another click.

7.6 Tips for a hotter coffee

To make a hotter coffee, proceed as follows:
• perform a rinse cycle by selecting the "Rinse" function
(paragraph "6.3 Rinse ");
• warm the cups with hot water using the hot water function
(see section "10. Delivering hot water");
• increase the coffee temperature (paragraph "6.9 Coffee
temperature "). Varying the temperature has most effect
for long beverages.

8. COFFEE POT

Based on espresso coffee, this beverage is light and balanced,
with a fine layer of froth, ideal to share in company.
Optional accessory in certain models:
12
Coffee pot
(Capacity: 1 litre)
Model: DLSC021
EAN: 8004399333642
To make the beverage, proceed as follows:
Selected quantity
(*) The quantities indicated are approximate and may vary ac-
cording to the type of coffee.
13
1. Press "COFFEE POT";
2. Select the aroma and number of cups;
3. Press
4. "FILL TANK AND BEANS CONTAINER": fill the water tank
(A17) and fill the beans container (A3) (fig. 9). Make sure
there is sufficient water and coffee for the beverages you
want to prepare, then press
5. "PLACE POT UNDER SPOUTS". Position a carafe under the
coffee spouts (A9). When choosing the carafe to use, bear
in mind the quantity to be delivered, namely:
6. Press
begins automatically and an image of the selected bever-
age appears on the display, together with a progress bar
which gradually fills as preparation progresses.
Once the coffee has been made, the appliance is ready to make
the next beverage.
Please note:
• : press to interrupt preparation completely
and go back to the homepage.
SAFETY WARNING:
After making the pot of coffee, leave the ap-
pliance to cool for 5 minutes before making
another beverage. Risk of overheating!

9. MAKING CAPPUCCINOS AND MILK-BASED BEVERAGES

Please note!
To avoid milk with poor froth or large bubbles, always clean the
milk container lid (E2) and hot water connection nozzle (A8)
as described in sections "9.4 Cleaning the milk container after
use", "12.10 Cleaning the milk container" and "12.11 Cleaning
the hot water nozzle".

9.1 Filling and attaching the milk container

1. Remove the lid (E2) (fig. 13);
10
Quantity (ml) *
≃ 250
≃ 500
≃ 750
to move on to the next step.
.
: After a few seconds, preparation