Installation Procedure Overview - Nvidia ConnectX-6 Manual

Equipment Installation
This equipment should be installed, replaced, or serviced only by trained and qualified personnel.
Equipment Disposal
The disposal of this equipment should be in accordance to all national laws and regulations.
Local and National Electrical Codes
This equipment should be installed in compliance with local and national electrical codes.
Hazardous Radiation Exposure
• Caution – Use of controls or adjustment or performance of procedures other than those specified herein may result in hazardous
radiation exposure.For products with optical ports.
• CLASS 1 LASER PRODUCT and reference to the most recent laser standards:
IEC 60 825-1:1993 + A1:1997 + A2:2001 and EN 60825-1:1994+A1:1996+ A2:20

Installation Procedure Overview

The installation procedure of ConnectX-6 adapter cards for OCP Spec 3.0 involves the following steps:
Step
1 Check the system's hardware and software requirements.
2 Pay attention to the airflow consideration within the host system
3 Follow the safety precautions
4 Follow the pre-installation checklist
Procedure Direct Link
Refer to System Requirements
Refer to Airflow Requirements
Refer to Safety Precautions
Refer to Pre-Installation Checklist
18