Ocp 3.0 Adapter Card Installation Instructions - Nvidia ConnectX-6 Manual

3. Screw on the OCP 3.0 bracket with the supplied screws that came with the new bracket kit. Use the specified torx tool type and apply the specified
torque on the screws per bracket form factor.
Internal Lock Bracket

OCP 3.0 Adapter Card Installation Instructions

This section provides detailed instructions on how to install your adapter card in a
internal-lock, a pull-tab (thumbscrew), or an ejector-latch bracket. Follow the below instructions depending on the card you have purchased.

The following figures are for illustration purposes only.
1. Before installing the card, make sure that the system is off and the power cord is not connected to the server. Please follow proper electrical
grounding procedures.
2. Open the system case.
3. Align the card with the system rails.
Pull-tab Bracket
Note that one screw is flat-head 90° screw and the other is socket-head screw. Screw
on the different types of screws as shown in the below illustration.
system. The OCP 3.0 adapter card is shipped assembled either with an
Ejector-Latch Bracket
25